Activity Stream

Hagman, visual inspection showed no damage. We checked the type of neoprene used in the construction and it has a melting temperature of...

I went over the top with a quick compound just so I could find all of the places that need attention and see the real color for the color matching....

It's home. Time to start the glass refinishing.

The floor is glassed in one layer on the bottom and 2 layers n the top. The carpet went in on a Sunday afternoon.

Installing the foam.

Glassing the edges of the floor. The blue is some really good left over 1/2" plywood from a job.

I'm doing this build in the garage of a new home we are building in a upper scale retirement community. It's giving all of the retirees something to...

What did it do to the rubber mufflers?

Do you have the part number for this surf deck?

any chance anyone have a supra part number for these platforms? My 07 needs this upgrade badly

Thanks for the idea. I replaced the packing during the rebuild. What I'm trying to understand is that just sitting in the water or on the trailer,...

H20-ski, I'm sure you have checked / replaced the wax rope packing in the assembly above the rudder. I had a similar problem. New cable / helm...

If you are going the new distributor route, I had a very good result with my distributor upgrade (351W). you can see it in the photo, below. Here...

Ditching the nylon through hulls is, in my opinion, one of the best upgrades an older Supra owner can do. See my list in the Supra contest,...

Yes I have taken off the side panel. I thought I may have felt it with my hand but was unable to see. I will put a GoPro down there with a flashlight...

Rough area to get to. You’ll need skinny arms to wipe down the bottom of the oil pan and hose coming out of it to clean the area for inspection. ...