Activity Stream

Indeed it does help! Thanks my friend.

See this. https://forum.supraboats.com/showthread.php?200-hydraulic-wake-plate What you are wanting to do could be pretty expensive. It could...

Yeah didn't matter if i manually shifted at the casing. At this point i think the seasons over.

Even if you manually shift the trans at the casing? Unfortunately looks like something internal to the trans. Although the damper plate didn't...

Still waiting for delivered

How many layers of glass did you end up using? Do you feel it was worth putting in the 1/8" foam spacer?

I have a 94 La Brisa. All my instrument breakers are 10A. Hope this helps!

You should be able to check the fittings. The center bag has 2 pumps and can be accessed by the center circle in your floor, just past your cooler...

Question sir, I have a 2012 Launch 242 and experiencing the same issue. Did you ever get this resolved by chance?

Forgot to ask about Transom. Would it be best just to add a full sheet of 1" plywood to the transom or should I remove the current blocking and...

https://m.facebook.com/story.php?story_fbid=3401198139892864&id=207453395934037 If someone will let me know if this link doesn't work that would...

Id say the alternator is not contributing, if that pic is with the engine running.

I'm thinking you may have it really leaned out on both of the mixture screws, but the choke keeps it running until you warm it up and then it goes...

I just read this one today. Found it while looking for stringer replacement ...

I used the new gasket that came with the Holley rebuilt kit. I will try checking for a vacuum leak. Saw some stuff about a bad PCV valve causing...

99% of the time when you have to idle an engine up too keep it running, you have a vacuum leak somewhere. Are you sure you installed the correct...

Its a long a shot, but disconnect the battery for about a 1/2 hour and hook it back up and see if it reboots and clears the error. Other than that,...

I would start by unbolting the center floor panel. I would guess that would get you a quick visual Sent from my iPhone using Tapatalk

Do you know if there is any way to visually inspect the sub ballast area?

replaced damper plate and still no forward or reverse. Anyone have ideas?

I’m trying to avoid going the thousand dollar route with the wakemakers three reversible pump system. I thought about it, almost did it, but they...

Sounds like it could be damper plate related, unfortunately that means trans has to come out. But confirm that when you shift it by hand on the...