PDA

View Full Version : Ballast not filling



Tribal 20
01-16-2012, 11:47 AM
Ok. I'll try to be specific here. I have a 2007 launch 20ssv. The left rear bag stopped working all together. I hear the pump kicking on when I turn the center and right bags on. I have power to the switch (red light comes on at panel). I also checked fuses and breakers and all is good there. Any suggestions what to try next?

pap
01-17-2012, 06:31 PM
Have you taken the impeller out and see if it's broken? If the pump is getting power, then either it's a clog or the impeller is bad or the pump itself is burnt out. Have the impellers ever been changed?

Tribal 20
01-17-2012, 08:49 PM
I'm not getting power to either the fill or empty pumps. I replaced both the 3amp and 5amp fuses (even though they were good) and checked the connections around the fuse panel. I also took the switch panel off and made sure all connections were tight. Everything looks fine. Two questions. 1. Has anyone ever seen a switch go bad? 2. There is a big black connector behind the switches. Does anyone know what this is? it also has a large plug-in black cube.