PDA

View Full Version : bad news from the upholstrey shop today



ddb0
02-29-2012, 12:55 AM
so i took my 86 comp in to have new interior carpet averything done a few weeks ago. i went down to check on the progress this evening today and did not here good news. i knew there was on small soft spot in the floor where the drivers feet sit. well turns out that the whole tray in there is rotted out so that whole area is gotta be cut out rebuilt and glessed back in. my interior job just got a little moe expinsive. but the good news is it sould be done by next weekend. and its gonna look amazing

KG's Supra24
02-29-2012, 12:01 PM
I think jet is selling a foot tray?

Sent from my DROID RAZR using Tapatalk

ddb0
02-29-2012, 03:29 PM
really? ill have to pm him ive been looking for one. everywhere mine doesnt have one it was just carpet. is that something aftermarket?

KG's Supra24
02-29-2012, 03:38 PM
https://forum.supraboats.com/showthread.php?10301-Drivers-Foot-Pan-Rhino-Lined

Not sure if it is what you need but similar part?

ddb0
02-29-2012, 04:13 PM
just taled to my interior guy and he is just gonn rebuild it and lay glass over so it souldnt be a big deal without it. sould be plenty strong now.

Hagman
02-29-2012, 11:13 PM
This might work for you instead of carpet. I use the same rubber mat material that comes stock on the swim platform. This is a picture of the floor in my 86, 885588568857

jet
03-01-2012, 06:22 PM
Thanks KG.

ddb0
03-01-2012, 06:56 PM
thanks hagman i like that. is it just sea dek? laid over the carpet? Jet i left a message on your profile page but, i saw a while back you were looking for a ski pole for your comp i just pulled mine out while im doing the interior so i can make a new pice of wood to go over the hole. let me know if you want it

Hagman
03-01-2012, 08:48 PM
The carpet got pretty worn out after about 15 years. So I Remove the carpet and replaced it with rubber mat ,the same stuff that's on the swim platform. When I bought the boat my dealer had the drain hole plug. He said it was a good place for rot to start.

ddb0
03-01-2012, 10:35 PM
yea i know what they mean my whole pan and around it is all rotted out so its getting all cut out now and were gonna rebuild it all and fiber glass over the top of it so it will hopfully keep it from happening again. i guess i got kinda lucky because that is the only rot we found in striping it down all the floor was good and solid along with stringers> so i guess i souldnt complain to much