Prop packing wrench?

[scotthons]

Does anyone know where I can get a wrench that will work for this job? I have an '06 21V. Thanks.

[jet]

Any BIG cressen?? wrench will work. Needs to open up to a 1"-1/2"

[scotthons]

Thanks Jet, but I was having a hard time with the length of the wrench. It seemed to be a very small amount of room. I did not know if there was something that would work better.

[scotthons]

Just an fyi I ordered this wrench off of ebay. I will let you know how it works out.


1-7/8" Shaft Packing Wrench for Inboards

javascript:;

[csleaver]

Go to the hardware store and get an adjustable wrench for sink drain nuts. They are wide, thin jawed wrenches with a short handle. They sell the same ones at west marine (for about twice as much).

[Blackntan90]

I use an 'S' shaped adjustable wrench that is probably 100 years old! No kidding, it works great. I like the idea of the sink drain wrench.

[dbpainc]

Does anyone know where I can get a wrench that will work for this job? I have an '06 21V. Thanks.

If there is damage to the prop has been on a while you will need to pull the prop off. This will make sure you do not damage the prop more.

http://www.westmarine.com/webapp/wcs/stores/servlet/Product2_11151_10001_108360_-1____ProductDisplayErrorView

RAM MOUNTS
3 and 4 Blade Prop Removal Kit or Tool