PDA

View Full Version : Trim tab issue



DooSki
06-19-2012, 10:47 AM
Having an issue with my trim tab on a 07 Launch 20SSV. The tab works fine from say 50-100% but will not go down any further than the lower half of the trim gauge. Any ideas of where to start?

Thanks

CornRickey
06-19-2012, 12:58 PM
There not suppose to. The bow would dig in if the trim was able to go all the way down, but I thought the newer ones had a module to fake the gauge out having it move from one extreme to the other when the tab only moves a little. Did it do it before?

kevkev
06-19-2012, 03:14 PM
What is your fluid level???

DooSki
06-19-2012, 06:34 PM
There not suppose to. The bow would dig in if the trim was able to go all the way down, but I thought the newer ones had a module to fake the gauge out having it move from one extreme to the other when the tab only moves a little. Did it do it before?

It always has, 6th year with the boat and it's definitely not typical. Always had full range on the gauge and I cannot get the bow down as much as I'd like.

DooSki
06-19-2012, 06:35 PM
What is your fluid level???

That would be a good thing to check eh. I will take a look, thanks.