View Full Version : Fly High X Pole and Supra Comp
Sweaver
06-28-2012, 10:02 PM
Good evening fellow boaters. I just purchased a used Fly High X pole aluminum extended pylon for my 1988 Comp and it seems to fit loose over the factory pole. Is this normal or any suggestions to fix would be sweet. Thanks in advance.
bens250ex
06-28-2012, 10:31 PM
It's normal
Salty87
06-29-2012, 12:39 PM
tighten the bow strap and it shouldn't move.
Sweaver
06-29-2012, 04:49 PM
Thank you folks. I also talked to Mike at Fat Sac and received same advice.
Sweaver
matt k
07-04-2012, 08:45 AM
for what it's worth, mine has a plastic mesh tube (looks kind of like this: http://www.usplastic.com/catalog/images/products/labware/85258psku.jpg ) wrapped around the factory pylon to keep the fly high pole from banging around so much when it's not fully assembled and tensioned. It sort of works.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.