PDA

View Full Version : 2005 21V Launch NAV/ANC lights are out



jay nice
08-13-2012, 05:38 PM
Hello everyone,

I'm trying to help a friend with his 2005 21V and I hope someone here can help?

His NAV/ANC lights are out, both at the same time (not bulbs). However, the iluminated NAV/ANC switch has power going to it (iluminated) and the intrumentation cluster is also iluminated.

I took a look at the fusing and it appears that all the lights are wirred to breakers on a panel. I checked to see if any of the breakers needed resetting, but they all seem to check out ok? I'm chasing this down without the use of volt meter at this time but will most likely use one if needed.

Does anyone know what breaker controls this lighting or has anyone had this happen before that could help shed some light? ;)

Your help would be greatly appreciated.

Cheers

CornRickey
08-13-2012, 05:50 PM
I don't know if it pertains to the lights but there are also blade fuses on the circuit board that has the harnesses plugs above the breakers you are talking about.

jay nice
08-14-2012, 10:06 AM
Thanks for this info, I didn't see any blade fuses when I first looked at this.
I'll have a look again and let you know what I find or if this resolves the lighting issue.

Cheers!