80s - early 90s conbrio & comps bow was question

[Jdm89supra]

I have two supras one 82 comp and one 89 conbrio the conbrio I just completely rebuilt I know these are Lowe profile boats but I guess it is normal for bow washing and learning to drive a Lowe profile boat granite my conbrio the nose now sits about two inches higher that my comp but it bow washed more than the comp after the rebuild.it has not bow washed near as bad or as often only when letting out of the throttle and no weight in rather boat any thoughts. or is it normal

[Hagman]

Most of the wet foam you took out would have been in the back 1/2 of the boat. Always keep at least 3 110 lb HOTTIES setting in the back set.

[Jdm89supra]

That's pritty good

All of the foam that came out of the conbrio was soaked front to back and the chambers were full of water even after that and new foam in the intire boat it sits higher than my comp and still bow washes more is this y they stoped making them and also the comp is has the covered bow and if it washes it just runs off so its not.ass.big of a deal