Removing bow seat back cushions

[Zim]

I need to pull the seat backs out of the bow of my 06 20V to get access behind them (hopefully) to run speaker wire around the bow. Anyone know how these are attached to the boat, and if I remove them will I have access to hide wiring? If they don't give me more access, any other suggestions as to how to run speaker wire around the bow?

[beat taco]

http://img.tapatalk.com/d/13/05/09/a2yhyne6.jpg

Not much access gained and a total PITA!

[Zim]

Wow that looks like it would be a waste of time then. Any suggestions for getting speaker wire from the cubby under the observers seat to the other side of the boat? Is there a tunnel somewhere I can get through easily? Thanks for the pic.

[beat taco]

I was able to fish mine through, not sure how yours is configured but mine doesn't have a ski locker and already had an access hole to get under the floor on the helm side. I was able to drill a hole in the floor on the port cubby to come back up, after confirming I wouldn't hit anything with the access I gained from pulling up the removable floor pieces.