MXZDrew
07-11-2013, 10:36 PM
I just wanted to give a huge thanks to Odin @ Earmark for his excellent pre sale and post sale support on our new system in our 2007 22SSV. Odin was also able to offer a package discount and we no doubt got the best pricing I had seen and full warranty. I could not be happier with how it came out and it all went without a hitch. Everything worked as expected the first time we flipped the switich. Odin was spot on with everything we needed to pull off what we were looking for and the system blew my expectations away. I am in Western Michigan and there is not a single boat in my area I have ever seen with a Wetsounds setup on our lake. I see several newer Correct Craft and MC boats running factory systems that sounded decent but this setup definitely stepped up the game here! No comparison at all. For those of you like me, who have never heard a system like this are in for shock. Funny when I look back at some of the posts I read before I bought with naysayers on Wetsounds. Those guys either work for the competition or are a 15 year old talking smack on a computer. The clarity, power and volume of this system is like nothing I have ever heard. I hear things in songs on this boat I have not heard before. We make all the bystanders on the channel walls dance when we float by, watch 10 heads turn in sync from the cabin cruisers as we pass by. Being that there is nothing like this on the lake, the response has seemed pretty positive, just seems to make everyone want to dance and thats a whole lot of fun! I even seen people piloting large sail boats dancing as they drive. Thats a crowd that is typically oil and water against the wake boats here. Just awesome, it added a whole new element of fun to our boat. Although it was a lot of money we had a hard time spending, even my wife looks back with no regrets. I will be putting some pics up soon of the system in this post, hope to get some up this weekend.
Here is a list of what I installed:
Wetsounds 2 amp Wiring Kit
14ga. wire around the boat
14ga. wire in the tower
12ga. wire to the sub
(2) Rev 10 W/RGB LED Rings
(1) Syn 4 Amp powering Rev10
(6) XS-650 W/Built in RGB LED
(1) Syn 6 Amp powering XS-650 through Chan 1-4, Sub Bridged on Chan 5-6
(1) 10" Kicker Sub in factory location
(1) WS-420SQ
(1) Wetsounds RGB LED Controller
Approx. 25 hours of labor to install, not hard, tedious. LOTS of solder and heat shrinking with all the LED & wiring.
Happy to answer any questions on the install or components we chose. Also installed some SeaBlaze 3 Transom LED's today and going to pick up our new Surf Platform from the dealer tomorrow, excited to get that mounted up this weekend too. Will also be posting pics of that stuff separately.
THANKS AGAIN ODIN & EARMARK AUDIO!!
1273712735127361273812739
Here is a list of what I installed:
Wetsounds 2 amp Wiring Kit
14ga. wire around the boat
14ga. wire in the tower
12ga. wire to the sub
(2) Rev 10 W/RGB LED Rings
(1) Syn 4 Amp powering Rev10
(6) XS-650 W/Built in RGB LED
(1) Syn 6 Amp powering XS-650 through Chan 1-4, Sub Bridged on Chan 5-6
(1) 10" Kicker Sub in factory location
(1) WS-420SQ
(1) Wetsounds RGB LED Controller
Approx. 25 hours of labor to install, not hard, tedious. LOTS of solder and heat shrinking with all the LED & wiring.
Happy to answer any questions on the install or components we chose. Also installed some SeaBlaze 3 Transom LED's today and going to pick up our new Surf Platform from the dealer tomorrow, excited to get that mounted up this weekend too. Will also be posting pics of that stuff separately.
THANKS AGAIN ODIN & EARMARK AUDIO!!
1273712735127361273812739