Rad-a-cage front tower mount

[99bison]

Anyone have a spare, the tower bolt broke off inside it today. Thinking it may be easier to swap out the mount than get the stainless bolt out.

It's the front port side if that matters, not sure off hand.

I'm going to try and get the bolt out tomorrow, gotta get 4 more hours of riding in before the season ends to get to 100... And the season ends any day now!:(

[suprasam]

I have no idea which part you are actually looking for.....but this site has tons of nuts/bolts/odd parts. Quick service to http://www.diywake.com/shop/shopdisplayproducts.asp?id=74&cat=Hardware

[beat taco]

I haven't had to look for one but have seen threads about guys fixing stripped threads by about any means necessary over sourcing a new one which leads me to believe they are a tough find. I really think a good bolt extractor would get it.

[99bison]

Thanks for the input guys, I ended up getting the bolt out without a ton of trouble (couple hours) and it wasn't really frozen in at all.

Have replacement bolt ready to go, so hopefully all good.

[99bison]

http://img.tapatalk.com/d/13/09/27/5ysu7ahu.jpg

For reference, this is the part.