Grover
10-04-2013, 02:36 AM
Took Holley 4061 carb off to have rebuilt, and it looks like the spacer has never been off. The bolts seem to be fairly corroded going through spacer. I've soaked with
penetrating oil and it's soaking.
Not sure how to get it loose, rubber hammer? Pry bar?
I mean, it does need to come off right? And, have new gaskets installed between the carb/spacer and spacer/intake? Ski D.I.M. talks about getting one spacer gasket along with rebuild kit.
What would be the best way to do this simple - but intimidating - task? Last thing I need to do is bend a carb stud or something.
Thanks,
Grover
penetrating oil and it's soaking.
Not sure how to get it loose, rubber hammer? Pry bar?
I mean, it does need to come off right? And, have new gaskets installed between the carb/spacer and spacer/intake? Ski D.I.M. talks about getting one spacer gasket along with rebuild kit.
What would be the best way to do this simple - but intimidating - task? Last thing I need to do is bend a carb stud or something.
Thanks,
Grover