PDA

View Full Version : Raw water strainer



chris young
02-07-2014, 02:34 PM
So my boat has no raw water strainer and where I am it's inevitable that I stir up a lot of silt and sand when I leave and return to the dock. Any thoughts or suggestions before I pull the trigger on something?

michael hunter
02-07-2014, 04:43 PM
They are easily available the one on my sunsport is mounted above the trans and hooked in line between the raw water fitting and the trans cooler.

chris young
02-07-2014, 05:09 PM
Interesting location, I was planning on putting it in the bilge between the tranny cooler and the inlet but there's not a lot of room there, I hadn't considered mounting it above the tranny.

michael hunter
02-07-2014, 06:22 PM
I think we are talking about the same location. I just made a L bracket and used a bell housing bolt to support it. Here is a pic but it dosnt show it to good. If you need Ill take a new pic tomorrow.

http://i303.photobucket.com/albums/nn127/suprahunter/Suprawinterize004.jpg (http://s303.photobucket.com/user/suprahunter/media/Suprawinterize004.jpg.html)

chris young
02-10-2014, 03:11 PM
A pic would be nice, but no hurry, I won't be doing anything about it until April at the earliest. That's not the location I was thinking at all, I was planning on putting it much lower right beside the through hull fitting or there about, but I think where you've put it makes a bit more sense.

CJD
02-11-2014, 03:13 PM
Yes...above the water line is nice, just in case you have to clean it out iwhile still on the lake.

chris young
02-12-2014, 04:16 PM
Excellent point, sometimes I miss something really obvious, and as pulling my boat out once it's in is a major pain, (my railway converts to a dock) it's even more important to be able to clean it while it's floating. That's why I posted here first.

jasun
02-20-2014, 04:35 PM
Anyone have a PN or place to buy one? Mine went south last year.

92SupraComp
02-20-2014, 08:16 PM
skidim has them

chris young
02-20-2014, 09:53 PM
Yup http://www.skidim.com/prodinfo.asp?number=SHE18005

I'm going to buy the same one from an outfit here in Canada.

CornRickey
02-21-2014, 12:19 AM
Keep in mind that they are strainers and not filters. They catch bigger stuff like weeds not sand and silt.

michael hunter
02-21-2014, 09:22 AM
Anything small enough to get through the strainer will also pass through the cooling system. If you don't have a strainer then the trans cooler becomes the place for debris to collect.

lively
07-16-2015, 11:58 PM
what size are the ports , im about to buy one since i just rebuilt my raw water pump

http://www.ebay.com/itm/SHURflo-18016-Sea-Water-Strainer-1-1-4-Ports-/301398792367?hash=item462cc498af&vxp=mtr

chris young
07-20-2015, 01:07 PM
1" I bought the Groco WSB-1000.

Be aware that if you run antifreeze through it (winterizing) you'll end up with a cloudy opaque bowl. It also develops tiny cracks.