Speaker and light bar for Rad A cage

[blackstang]

We have a 2002 Supra Launch DD with the factory Rad A Cage tower. Our storage building was broken into this week and the stereo was completely stripped from the boat.. I am looking to purchase a speaker and light bar combo to install but was curious if anybody has heard of any problems installing a setup like this with it having to much weight? Our old setup was just two separate cans that were fairly light.

[Smitty75]

I have a roswell speaker light bar combo I'm looking to sell if you're interested. It's the 4 speaker (ken wood) 3 light combo. I juts took it off my 21v a month ago. I ended up upgrading to an exile system. http://img.tapatalk.com/d/14/03/22/yqedazyg.jpg

[blackstang]

I have the rad a cage with 1 5/8 diameter tubing. Will your clamps go that small? How much?

[Smitty75]

I know it was mounted on my front bar which I think is 1 7/8 but I can check tomorrow to make certain if you're interested. I'd take $450 plus shipping

[MJHKnox]

I just took mine off as well. I do not know the different sizes of the tubing, but I think mine is 1 7/8. It's from a 2007 Supra.
If Smitty75's does not fit, i will get a measurement for you.

Otherwise I will get mine posted on the board in another week or so. I have to take some pics. I'm going to try to sell all my stuff:
Kenwook Amp
Kenwood Speaker Cans & Light Bar Combo
Kenwood 6.5" Speakers (6)

Mark

[Smitty75]

It looks like 1 7/8. So you would probably either need new clamps or just a thin rubber sleeve inside of the clamp. If your interests just let me know. Attached are a few more pics.http://img.tapatalk.com/d/14/03/23/daqy9a3u.jpghttp://img.tapatalk.com/d/14/03/23/emypyna9.jpg

[blackstang]

I am interested, Any chance you could determine how much it weighs? I have heard horror stories of heavy rack setups on the earlier years towers. Thanks

[Smitty75]

I am interested, Any chance you could determine how much it weighs? I have heard horror stories of heavy rack setups on the earlier years towers. Thanks

Message sent.

[vvfdfirefighter]

smitty/MJHKnox....do either of you still have these available?

[Smitty75]

Sorry, sold mine

[ramzak]

I have the same Roswell Light-Bar for sale with a few differences.

1. Mine is Black
2. My Lights are not the Halogen ones because I replaced them with LED's
3. I replaced the super-crappy-Kenwood-car-door-speakers with the Kicker HCLD's that every body is talking about on these forums. The speakers alone are $500. It is a set of horns and a set of mid-basses that come as a package. They are brand new and come with the original box. These speakers are designed to project 80+ feet. The standard Kenwoods project about 5'.

I am attaching really bad pics because I don't have any better one right now. I will take detailed pics for those interested.
one pic shows the bar with the original Kenwood setup the other one is a terrible pic that shows the new speakers.

Text or email because I rarely check these Forums
Mark 281-610-5017
[email protected]

14041

[ramzak]

Here is the other pic

14042

[vvfdfirefighter]

Here is the other pic

14042

Ramzak How much are you asking?

Sent from my Galaxy Note 2 using Tapatalk

[ramzak]

Ramzak How much are you asking?

Sent from my Galaxy Note 2 using Tapatalk


I think $900 sounds fair. Please advise