PDA

View Full Version : Screws for swim platform bracket ripped through transom 05 21v


luke22885
07-21-2014, 03:05 PM
14765

So over the weekend, I had the top bolts rip out of the transom of the boat as shown in the attached picture. Has anyone had this happen before? I tried looking at the backside but it seems to be under the floor so I am afraid the floor has to be cut out in the back? Any help would be greatly appreciated.

Thanks
garyholl
07-21-2014, 03:59 PM
My brother is huge too
SUPRA_ALLEGRO_LANE
07-21-2014, 04:38 PM
I'll have a bunch of pictures of the boat, after I get off work.
Cusefan78
07-23-2014, 04:00 PM
Wow I can't believe you have that problem on a 05. I would repair the transom damage then get behind it with a piece of wood that was glassed. Then drill use stainless nuts and bolts with large fender washers. It'll never happen again.
kevkev
07-24-2014, 09:35 AM
Wow I can't believe you have that problem on a 05. I would repair the transom damage then get behind it with a piece of wood that was glassed. Then drill use stainless nuts and bolts with large fender washers. It'll never happen again.

What he said. I had this happen on my 07 the first summer that we had the boat.