PDA

View Full Version : Which mounts for WetSounds speakers



stisinai
01-01-2015, 08:42 PM
I have a 2013 21V which currently has (4) 6-1/2" speakers on the tower. The two on the sides are Polk Audio and swivel and the two on the top are roswell and are fixed. I'm looking to replace all 4 with the REV-10 speakers but don't know what to do with the mounts. Do I need to get the swivel mounts and attach to the tower in a new spot or can the W/S cans attach to the existing mounts?

Thanks for any help
Steve

leetudor
01-01-2015, 09:41 PM
You are going to need the Wet Sounds mounts.

stisinai
01-01-2015, 09:57 PM
Thank you very much

Wylietunes
01-02-2015, 04:08 PM
What do the factory mounts look like, this or is it the tube tower?

http://i181.photobucket.com/albums/x101/chpthril/chpthril002/IMG_20140906_103055_665_zps6e788178.jpg (http://s181.photobucket.com/user/chpthril/media/chpthril002/IMG_20140906_103055_665_zps6e788178.jpg.html)

stisinai
01-02-2015, 06:40 PM
The boat is in storage right now. This is the best picture I have. The two side speakers connect to a funky shaped plate on the tower and those two rotate. I don't remember what the connection looks like on the top two but they are fixed

Wylietunes
01-02-2015, 08:58 PM
I think you may have the FTC5 tower. If so, Wet Sounds has upper and lower adapters for the OEM spots. They will work with their X mount pods as well as pods with the TC3-S clamp system.

stisinai
01-02-2015, 09:05 PM
Cool. Thanks. I emailed them about a week ago and haven't heard back. I'll give them a call on Monday

Wylietunes
01-03-2015, 01:58 PM
Dont forget that you may also have a local Wet Sounds dealer that would likely be happy to assist you with both the bracket, as well as the speakers and system.