Where to Find Supra Brand Boat Covers?

[ConnManSupraLaunch]

I've been trying to find a full bow-to-stern boat cover (preferably branded for Supra) for my 2009 Supra Launch21V. All I keep getting are cheap knock-off cover makers. Ordered a Seal Skin as it alleged a custom fit to my boat and it fit about as good as my socks on my 9-month old son. #frustrated. I'm done trying to save some cash and would prefer to just get as close to a factory (Supra) made cover as possible. Does anyone have suggestions on where to find?

Thank you Supra Fans!8-)

Clay / Dallas, TX

[cjtpilot]

http://skiboatcovers.thecanvasshoppe.com/

[wotan2525]

http://skiboatcovers.thecanvasshoppe.com/

That's the only "custom" fit cover company that I know of. The rest of them just take a similar boat and make the cover fit -- these guys will make you a cover that uses a pattern actually made from your boat.

Your other alternative is to find a local shop to make you a custom fit cover. In my case, I couldn't find anything less than about $2500 locally, so I bit the bullet and spent about $900 on skiboatcovers.com. Very happy with the fit.

[leetudor]

http://www.carvercovers.com/

[Salty87]

A local shop in Austin wanted around $2k as well. I thought they just didn't want to make one but maybe that's the going rate.

Carver isn't 'custom' but I'll vouch for their warrantee. I bought one through iBoats and it split at a seam after something like 2 years. It was really my fault as water pooled and i ripped the cover trying to dump it out. I wasn't using support poles at the time. They wanted to send me a new one but I asked about applying the credit to a better cover and they had no problem with that.

I've never had a truly custom cover but I suspect they all need support poles to prevent pooling. Those and one of these ( http://hangtyte.com/ ) and the Carver cover is great.

[crystal waters]

Skiboatcovers.com

[jasun]

I know this does not help you much unless you live in Northeast Indiana, but I had a cover made for my boat for just under $500. There is a local canvas shop that made it. It is not Sunbrella acrylic, but it is their vinyl. He said the lifespan would be between five and seven years. I will be into season three with it this year, and it works great. http://tapatalk.imageshack.com/v2/15/02/17/263c02365f9e6e71af1a0d79d864cea9.jpg


Sent from my iPhone using Tapatalk

[cjtpilot]

Hey Jasun, can you PM me more info on where you got your cover made at? Even though that might be a little drive for me thats a hell of a deal.



I know this does not help you much unless you live in Northeast Indiana, but I had a cover made for my boat for just under $500. There is a local canvas shop that made it. It is not Sunbrella acrylic, but it is their vinyl. He said the lifespan would be between five and seven years. I will be into season three with it this year, and it works great. http://tapatalk.imageshack.com/v2/15/02/17/263c02365f9e6e71af1a0d79d864cea9.jpg




Sent from my iPhone using Tapatalk

[Jetlink]

Hey Jasun, can you PM me more info on where you got your cover made at? Even though that might be a little drive for me thats a hell of a deal.

Drive? Why drive it when I'm sure there are other options available. 😄

[jasun]

Cjtpilot , I sent you a couple private messages.


Sent from my iPhone using Tapatalk

[Zim]

Thanks to kevkev, I just scored a factory cover off a dealers shelf for cost.

[maas885]

I searched and searched. Ended up having a custom cover made for my boat and tower speakers. Cost about $1,600.00. 15788

[wotan2525]

The fit looks great but I get a little bit sad whenever I see snaps. $1600 is not unreasonable for a custom made cover.

[Rakkasanscout187]

Aurora Canvas is in Missouri. They make super nice boat covers. A buddy of mine had them make one for his Bullet bass boat and the fit was perfect. Here is the link.

http://www.auroracanvas.com

[Zim]

I searched and searched. Ended up having a custom cover made for my boat and tower speakers. Cost about $1,600.00. 15788

Holy smokes!!! I paid just over 400 for mine shipped for the factory cover for my 20v..

[HotWaterMoore]

Rnr-marine is currently having a May sunbrella sale. Most of their 22' boat exact fit cover are around $650.

http://rnr-marine.com/

[supra21]

http://www.greatlakesboattop.com/ they made the stock one for my 21v and I got a quote to replace it for about $1,000 shipped.