MJHKnox
05-18-2015, 10:46 PM
I’m replaced my stereo system on my 2007 Supra SSV.
(1) Kenwood AMP X450-4
See something similar online at:
http://www.crutchfield.com/p_113X4504/Kenwood-Excelon-X450-4.html?showAll=N&search=AMP_X450-4&skipvs=T
Amp A: 60 watts RMS x 2 at 4 ohms (75 watts RMS x 2 at 2 ohms)
Amp B: 100 watts RMS x 2 at 4 ohms (150 watts RMS x 2 at 2 ohms)
Amp B bridged: 300 watts RMS x 1 at 4 ohms (4-ohm stable bridged, Amp A not bridgable)
variable high-pass filters on all channels (50-200 Hz, 12 dB/octave)
variable low-pass filter on B channels (50-200 Hz, 24 dB/octave)
variable bass boost on B channels (0-18 dB at 40 Hz)
cooling fan
preamp inputs
fuse rating: 40A x 2
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
13-5/8"W x 2-3/16"H x 7-3/8"D
NOTE: One of the legs was glued together in the pics. When I removed this from my boat, I had the unit bench-tested at the local stereo store to make sure it works..
I have other posts for.
(1) Kenwood AMP
(6) Kenwood Speakers
(1) Kenwood Sub
(1) Roswell Light Bar/ with 4 Kenwood Tower Speakers
If you have any questions, shoot me an email. I travel for work, so I will get back to you ASAP.
[email protected]
I will list the other items in different posts. Make an offer.
Mark
15784
15785
15786
15787
(1) Kenwood AMP X450-4
See something similar online at:
http://www.crutchfield.com/p_113X4504/Kenwood-Excelon-X450-4.html?showAll=N&search=AMP_X450-4&skipvs=T
Amp A: 60 watts RMS x 2 at 4 ohms (75 watts RMS x 2 at 2 ohms)
Amp B: 100 watts RMS x 2 at 4 ohms (150 watts RMS x 2 at 2 ohms)
Amp B bridged: 300 watts RMS x 1 at 4 ohms (4-ohm stable bridged, Amp A not bridgable)
variable high-pass filters on all channels (50-200 Hz, 12 dB/octave)
variable low-pass filter on B channels (50-200 Hz, 24 dB/octave)
variable bass boost on B channels (0-18 dB at 40 Hz)
cooling fan
preamp inputs
fuse rating: 40A x 2
4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
13-5/8"W x 2-3/16"H x 7-3/8"D
NOTE: One of the legs was glued together in the pics. When I removed this from my boat, I had the unit bench-tested at the local stereo store to make sure it works..
I have other posts for.
(1) Kenwood AMP
(6) Kenwood Speakers
(1) Kenwood Sub
(1) Roswell Light Bar/ with 4 Kenwood Tower Speakers
If you have any questions, shoot me an email. I travel for work, so I will get back to you ASAP.
[email protected]
I will list the other items in different posts. Make an offer.
Mark
15784
15785
15786
15787