View Full Version : Ugh... My tower is cracked???
Plum Nauti
06-30-2016, 09:09 AM
http://uploads.tapatalk-cdn.com/20160630/a659ac2836b56161dc3fe834f45c9f25.jpg
What the heck is happening here?? And how do I actually go about having this repaired? Thoughts
Not sure how it happened, probably from flexing over time, or impurities in the metal. A skilled metal worker / welder can grind out the crack and weld it back up it for you. Do it now before it gets worse
gnarlydude
06-30-2016, 11:22 AM
Disconnect anything plastic or rubber or you will melt it (I actually did this... Dumb).
Sent from my iPhone using Tapatalk
MJHKnox
06-30-2016, 02:00 PM
Not sure how it happened, probably from flexing over time, or impurities in the metal. A skilled metal worker / welder can grind out the crack and weld it back up it for you. Do it now before it gets worse
Agree. A good welder could fix that before it gets worse.
Sent from my iPhone using Tapatalk
NorCalPR
06-30-2016, 09:49 PM
You towing tubers off the tower?
Sent from my SM-G920V using Tapatalk
Plum Nauti
07-01-2016, 08:59 AM
No Tubes that I am aware of. It's second or third hand, so not too sure of the prior owners knowledge of that no,no. Just caught me by surprise.
michael y
07-04-2016, 07:36 AM
The only repair you can do is welding, drills holes in each end of crack first the weld. Michael
kevkev
07-10-2016, 09:00 AM
The crack appears to go almost 50% of the diameter. If that's the case it's time for a new piece, not just weld it up.
It's hard to tell from your pic if it's just dirty or if the crack wraps around with the weld.
Sent from my iPhone using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.