View Full Version : Trim gauge won't work!
klishchynsky
07-28-2016, 02:31 AM
I have a 2001 supra launch ssv. The gauge that shows your wake plate percentage only goes as high as 50%. As of today it won't work at all! Just wondering if anyone has had this issue before.
Sent from my iPhone using Tapatalk
klishchynsky
07-28-2016, 05:31 PM
http://uploads.tapatalk-cdn.com/20160728/58c2e083365d319353f3c8992e6d2614.jpg
Here's the gauge.
Sent from my iPhone using Tapatalk
Eric1687
10-13-2016, 07:26 PM
I've got same boat and same problem on mine, did you ever figure it out ?
99bison
10-14-2016, 07:36 AM
The 50% is normal, that era uses a shorter ram from Bennett, hence why it only has a half range.
As to why it no longer works... check the wires, it's a pretty non tech setup so likely there's a loose, corroded or broken wire.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.