PDA

View Full Version : Surf weight for SA450 with Swell system



djsharpe
08-03-2016, 02:00 PM
Hi all

I am looking for any input on different surf setups for a 2014 SA with the swell set up. I have a decent wave but would like to see if there is some better tunes out there I could try. My current set up is as follows:

Speed - 11.1mph
Swell - skim setting (factory default)
Wakeplate - 30%
Rear Ballast - 770lb both sides
Front ballast - 60%

Would love some input on what people have found to be a good setup for their SA's out there.

thanks

Jason

MJHKnox
08-09-2016, 08:46 AM
You might want to try to post on the Moomba site. There are more guys over there with new boats - Supra and Moomba. I know there are some regulars with 13s-14s and the SA model.

djsharpe
08-15-2016, 12:15 AM
Thanks

Sent from my SM-G935W8 using Tapatalk

Reganjohnson1892
08-23-2016, 01:27 AM
port 100% center 70% starboard 75% smart plate 25& wake plate 50% speed 11.0

joe surfer
08-24-2016, 10:43 PM
will have to try this out Regan im one week in on my new SA 450 and looking for that sweet set up.... is it usaully the exact oppisite on the settings if you wanna switch over to the other side?