View Full Version : Drive Shaft Packing Wrench
I've been tightening the nut for my drive shaft packing using large pliers. I'm not proud of it!?! Seeing as it's a 24SSV, and I can't even see the packing nut to tell what size it is, I wondered if anyone can recommend a "correct" size and type wrench to adjust the packing?
roosm
04-26-2017, 08:14 AM
I've been tightening the nut for my drive shaft packing using large pliers. I'm not proud of it!?! Seeing as it's a 24SSV, and I can't even see the packing nut to tell what size it is, I wondered if anyone can recommend a "correct" size and type wrench to adjust the packing?
Skidim sells one, not sure if that would be what you are looking for?
lively
04-26-2017, 10:45 AM
Use a tape measure and measure the nut , if the shaft is inch and a quarter I would guess the nut would be 1-7/8"
Sent from my iPhone using Tapatalk
scottschmitt
04-26-2017, 03:51 PM
Try this:
http://www.skidim.com/PACKING-NUT-WRENCH/productinfo/WRENCH/
Thanks! I think the nut size is 1-7/8", so I ordered the wrench. I'll let you know how it fits...
jzelt
04-28-2017, 02:17 PM
I bought one of these and used a grinder to hack off ~1/2 of the handle.
http://www.homedepot.com/p/HDX-Adjustable-Slip-Nut-Wrench-HDX152/204218628?cm_mmc=SEM%7cTHD%7cG%7c0%7cG-PLA-BT3-HDX-D59-Decor%7c&gclid=Cj0KEQjwmpW6BRCf5sXp59_U_ssBEiQAGCV9GovpoVoU viTySkrAqAUtbye0uh-zf3Sygm4BpyOCMHsaAn558P8HAQ&gclsrc=aw.ds
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.