Need engine cover base dimensions (85 sunsport skier)

[Kelleher09]

Hey guys I'm new to the forum so forgive me if I'm doing something wrong... i'm rebuilding an 85 supra sunsport and the the base of the engine cover is completely rotted out and I don't have any good dimensions for it was wondering if anyone could help me

Thanks


Sent from my iPhone using Tapatalk

[zroe]

I have an 86 Sunspot Skier I could measure up for you. It might be later in the week until I can post measurements though.


Sent from my iPhone using Tapatalk

[Kelleher09]

I have an 86 Sunspot Skier I could measure up for you. It might be later in the week until I can post measurements though.


Sent from my iPhone using Tapatalk

Thanks I would that would be awesome no rush I'm not sure if it sits on top or slides into the base


Sent from my iPhone using Tapatalk

[zroe]

My engine cover base sits on to p of the floor and the plastic flip cover sits flush on top of it. I will post some pictures of it (out of the boat) and get some rough dimensions for you. I'll also measure my engine height since I would hate to give you dimensions for you to build it and then it hits the top of the engine!

Are you doing a full rebuild down to the hull? Are you doing it yourself? I would be interested to know what you are planning to spend on materials so that I can start budgeting for my eventual rebuild. I didn't know how imperative stringer replacement was on Supras when I bought the boat last year, I think I would have still bought it because I love the classic lines but I would have definitely tried to talk them down on the price!

Cheers,
Zach

[Kelleher09]

My engine cover base sits on to p of the floor and the plastic flip cover sits flush on top of it. I will post some pictures of it (out of the boat) and get some rough dimensions for you. I'll also measure my engine height since I would hate to give you dimensions for you to build it and then it hits the top of the engine!

Are you doing a full rebuild down to the hull? Are you doing it yourself? I would be interested to know what you are planning to spend on materials so that I can start budgeting for my eventual rebuild. I didn't know how imperative stringer replacement was on Supras when I bought the boat last year, I think I would have still bought it because I love the classic lines but I would have definitely tried to talk them down on the price!

Cheers,
Zach

Yes I'm doing a full build there are many different ways people do it .. the way I'm doing it is about $1800 worth of material for stringers foam all the fiberglass resin and floor.id be glad to answer any more questions if you wan any more info

https://uploads.tapatalk-cdn.com/20170612/39438c5c5983705be2e5897f933c7503.jpg

https://uploads.tapatalk-cdn.com/20170612/8288ed942f2125ca711138dc44b947e5.jpg

https://uploads.tapatalk-cdn.com/20170612/bf2eb254dd68f7e6232f3da20f164022.jpg

https://uploads.tapatalk-cdn.com/20170612/e60fd10503dd71ccb7aee837577c649e.jpg



Sent from my iPhone using Tapatalk

[zroe]

Nice pictures! Thanks for the information. My wife is a little nervous to let me tear apart our boat, so we'll see if I can convince her otherwise. I started tearing out the waterlogged foam and I am hoping to be able to use it one more season before having to do the stringers. I'll post some pictures of what I have done so far in my own thread shortly.

[zroe]

here are a few images of my engine cover, mine sits on top of the deck, currently it was loose but has brackets that would attach it to the floor. I drew up a print last night and realized I forgot to measure the thickness so I'll check that as well as verify my engine height from the floor tonight.
18141181421814318144

[Kelleher09]

here are a few images of my engine cover, mine sits on top of the deck, currently it was loose but has brackets that would attach it to the floor. I drew up a print last night and realized I forgot to measure the thickness so I'll check that as well as verify my engine height from the floor tonight.
18141181421814318144

Thanks a lot [emoji1303]


Sent from my iPhone using Tapatalk

[zroe]

Sorry I've been busy and haven't made it out to get the last to measurements.


Sent from my iPhone using Tapatalk

[gstsoftware]

LegalRaasta (https://www.legalraasta.com) is an online portal for legal services.

Our services:
1. GST Software (https://www.legalraasta.com/gst-software/)
2. GST return filing software (https://www.taxraahi.com/gst)
3. Online Seller Finance (https://loanraahi.com/online-seller-finance/)
4. Equipment Financing (https://loanraahi.com/equipment-financing/)
5. machine loan (https://loanraahi.com/equipment-financing/)
6. Invoice Financing (https://loanraahi.com/invoice-financing/)
7. Home Loan (https://loanraahi.com/home-loan/)
8. Merchant Cash Advance (https://loanraahi.com/merchant-cash-advance/)

[zroe]

Sorry I've been busy and haven't made it out to get the last to measurements.


Sent from my iPhone using Tapatalk

https://uploads.tapatalk-cdn.com/20170622/cf3c6f48176e55ab7a66d048a2ea2238.jpg
Finally got the last two measurements. Let me know if you have any trouble reading the details in the picture.



Sent from my iPhone using Tapatalk

[Kelleher09]

https://uploads.tapatalk-cdn.com/20170622/cf3c6f48176e55ab7a66d048a2ea2238.jpg
Finally got the last two measurements. Let me know if you have any trouble reading the details in the picture.



Sent from my iPhone using Tapatalk

Thanks a lot appreciate you getting those measurements for me .. I can read everything just fine


Sent from my iPhone using Tapatalk

[Cooose]

Kelleher09 - You should start yourself a build thread over on the service & repair side!

Nice work so far, me personally I chose not to notch the new stringers going back in given this was a weakpoint in the original design by everyone has their own way of going about it. You've made some good progress and I wish I already had a floor down.

[Kelleher09]

Thanks Cooose I have been thinking about starting a thread just really new to the forum trying to figure it out.. I used LVL's for the stringers so I think they will be strong enough with 2 layers of 1708 biaxial hopefully won't be an issue


Sent from my iPhone using Tapatalk