Ballast Valves and Manifold System

[Truckerspawn]

Dose any know where the locational of Manifold System?
I think central bag Valve Solenoid is out. Want redo the system late. Pic will help alot

[CornRickey]

Look on top of your v drive. Giving the year and model tends to get you more detailed info.

[Truckerspawn]

Supra 2006 Launch 21V

[CornRickey]

See above...

[LloydP]

If you have one, it will be really hard to miss. 3 green round sprinkler valves attached to the lines going to the three bags. The whole manifold sits right on top of the v-drive, when you remove the cover under the back seat - it will be right there.

Lloyd

[Truckerspawn]

thx for the help

[jzelt]

Verify the fuse to the valve. (Ours is located under the dash). You can swap one that works with one that doesn't and see if that debugs the issue.

[Truckerspawn]

I try the fuse first then go for there.Can sweep the sprinkler valves and put in 1" electric ball valves?

[trayson]

I try the fuse first then go for there.Can sweep the sprinkler valves and put in 1" electric ball valves?

A handful of people have done this. I have a couple motorized ball valves for sale if you're interested.
https://forum.moomba.com/showthread.php?29448-Motorized-Ball-Valves

[CornRickey]

Verify you have power to the valve first the switch them out for motorized, self closing 12 volt valves. I just did mine and cut the fill time of a 750lb bag down to a touch over seven minutes. Wish I would have done it years ago. Amazon, US Solid is the manufacturer. 44 bucks a piece.