View Full Version : Ignition issues 07 21v
Shivelz
10-23-2017, 08:39 AM
I have had some issues with the ignition. Have power on all 3 wires as I turn the key, but the gauges wont come on and the boat will not even think about starting... the last time this happened I was able to pull the relay to the ecm and put a 12v jumper and it started the ecm and everything was fine. This time that isn't working... I have full power to the rest of the boat just not on the ignition side.... any ideas?
Have you checked the big 40 amp breaker in the engine bay?
leetudor
10-23-2017, 03:10 PM
I have full power to the rest of the boat just not on the ignition side.... any ideas?
Are you saying no power coming off the key switch?
Shivelz
10-23-2017, 03:21 PM
Have you checked the big 40 amp breaker in the engine bay?
Yes. I have pulled it out and checked the ohms also and everything checks out
Shivelz
10-24-2017, 03:15 PM
I have power on all three legs of key switch
Shivelz
11-12-2017, 07:39 PM
Found it. Believe it or not it was my ground cable end . It was corroded enough that sometimes it would make or not make enough contact...
docdrs
11-14-2017, 12:59 AM
Thank you for the update and the culprit.
Shivelz
11-14-2017, 06:32 AM
Just glad it was nothing major. Just quite a few frustrating hours of narrowing it down..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.