Ignition issues 07 21v

[Shivelz]

I have had some issues with the ignition. Have power on all 3 wires as I turn the key, but the gauges wont come on and the boat will not even think about starting... the last time this happened I was able to pull the relay to the ecm and put a 12v jumper and it started the ecm and everything was fine. This time that isn't working... I have full power to the rest of the boat just not on the ignition side.... any ideas?

[CJD]

Have you checked the big 40 amp breaker in the engine bay?

[leetudor]

I have full power to the rest of the boat just not on the ignition side.... any ideas?

Are you saying no power coming off the key switch?

[Shivelz]

Have you checked the big 40 amp breaker in the engine bay?

Yes. I have pulled it out and checked the ohms also and everything checks out

[Shivelz]

I have power on all three legs of key switch

[Shivelz]

Found it. Believe it or not it was my ground cable end . It was corroded enough that sometimes it would make or not make enough contact...

[docdrs]

Thank you for the update and the culprit.

[Shivelz]

Just glad it was nothing major. Just quite a few frustrating hours of narrowing it down..