PDA

View Full Version : 1991 supra comp ignition barrel



adave
04-10-2018, 04:47 PM
Hi all,i am in the uk and have a 91 supra comp ts6m.I want to change the ignition as mine is a bit sticky and causing starter over run.Can someone tell me an aftermarket raplacement part number i.e sierra that i can get in the uk.Also can anyone confirm it is a 3 position but what amperage should it be.
Thanks

michael hunter
04-14-2018, 05:47 PM
Are you talking about the Ignition switch or the solenoid on the back of the engine. Skidim is a good place to get both.

adave
04-22-2018, 07:21 AM
Sorry been busy and have not checked messages.
Boat starts fine every time and has complete new starter however nearly every time i start it am getting small amount of over run on starter and key is quite stiff even though it is returning but im thinking maybe not all the way quick enough,or maybe i am barking up the wrong tree entirely.
Thanks dave

michael hunter
04-22-2018, 07:27 AM
The ignition switch is a very inexpensive part if its stiff it is probably going anyway . Skidim can set you up with a new one.