View Full Version : Sherwood G-21 Raw Water Pump
92TS6COMP
01-10-2021, 11:23 PM
Hi guys,
Looking for the pully assembly for a Sherwood G-20/21 water pump or a complete unit. I believe the previous owner over tightened the bolt that holds the pump to the bracket and it cracked.
I attached a couple of pictures of the assembly and also of the Supra TS6M it belongs to :).
Thanks,
Kevin
michael hunter
01-11-2021, 08:05 AM
That pump is very expensive I would clean it up and epoxi it back together.
Mischief IV
01-11-2021, 07:26 PM
That pump is very expensive I would clean it up and epoxi it back together.
About $472.00 to be exact.
Mischief IV
01-11-2021, 07:37 PM
https://i.imgur.com/ND2Rrpp.jpg
Good looking boat!
92TS6COMP
01-11-2021, 11:17 PM
That pump is very expensive I would clean it up and epoxi it back together.
Thanks for the response, I will clean it up and epoxy it but would still like to find a used one to have on hand just in case... :)
I thought about trying to convert to a crank driven Johnson as it is only $192, a bit better than $472.
Thanks MischiefIV, she has a few flaws but we love it!!
Mischief IV
01-12-2021, 12:40 PM
Thanks for the response, I will clean it up and epoxy it but would still like to find a used one to have on hand just in case... :)
I thought about trying to convert to a crank driven Johnson as it is only $192, a bit better than $472.
Thanks MischiefIV, she has a few flaws but we love it!!
It deserved to be seen in large format. I like that color combo.
I've seen a few used pumps on Craigslist occasionally surfing for parts.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.