PDA

View Full Version : Strut bushing


Brian_289
03-03-2021, 08:10 PM
I need to replace the strut bushing on my boat. I measured the length of the strut and it’s 8”. I can only seem to find 4” and 4 1/2” bushings. Is it safe to assume it uses two 4” ones? I was under the impression it would be one long bushing.


Sent from my iPhone using Tapatalk
michael hunter
03-04-2021, 07:17 AM
Call skidim they will help you get the right part and tell you how to install.
csuggs
03-13-2021, 07:26 AM
I'm thinking it is two pieces, each held in with a set screw. At least that's what I remember when I did mine.

Sent from my SM-G973U using Tapatalk
Brian_289
04-18-2021, 08:39 PM
I'm thinking it is two pieces, each held in with a set screw. At least that's what I remember when I did mine.

Sent from my SM-G973U using Tapatalk

It was. The boat came with a spare 4 1/2” bushing. When I pulled the old ones out they were maybe 2” long. So I cut the one I had in half and installed them. Good to go.


Sent from my iPhone using Tapatalk