View Full Version : Overheating issue resolved
Brian_289
07-04-2021, 10:48 AM
I had to post this here. It might be worthy of an award. I think the last five failed water pump impellers were in there https://uploads.tapatalk-cdn.com/20210704/1f8d2e0262b0d8ac8afee0e1f222c1c8.jpg
https://uploads.tapatalk-cdn.com/20210704/791dfa3632947fcaab8649e710b9c377.jpg
Sent from my iPhone using Tapatalk
csuggs
07-04-2021, 01:14 PM
Wow! So your heat exchanger is on the pressure side of the raw water pump?
Sent from my SM-G973U using Tapatalk
Interesting. I change the impeller annually to prevent that, but I did have a small chunk of one impeller flake off a few years ago. Now I know where to look for it!
csuggs
07-04-2021, 05:18 PM
That is interesting. My '86 has the trans cooler on the suction side so I'm not sure where chunks would accumulate. Thermostat housing, I suppose. I install a new one every odd year, and remove it every year so that it drains completely, and I store the impeller in a relaxed position, out of the pump over the winter.
Sent from my SM-G973U using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.