PDA

View Full Version : torque wrench settings



Nick H
01-20-2004, 06:14 PM
I have a 90 comp with a 351 ford PCM .Can anyone tell the correct torque wrench setting for the exhaust manifold bolts ( the 16 bolts which hold the manifolds onto the block ).
Thanks

Nick H

Brian Raymond
01-20-2004, 11:17 PM
Nick, contact Vince, at Discount Inboard Marine. He has all the PCM motor specs. You can reach him at (803)345-0996,or email; www.skidim.com. Tell him I sent ya. Brian Raymond