Fman
03-17-2010, 12:05 AM
I have my boat at a stereo shop right now getting the HSE/WS-420/I-pod docking station installed. I got a call today from the installer and they are having problems trying to get the HSE sync'd with the Indmar engine. He has installed many of these on MC's, Malibu's, etc.... and cant seem to figure out why he cant tap into the correct wire. He has never installed one on a Supra before, and now informed me the Check engine prompt is on when the ignition is turned on. Great, this is usually what happens when I take my boat or car in to get something done!!! I do trust him and tomorrow he is going to call Indmar and HSE to figure out what is going on.
I changed my impeller last month and had to bump start the engine and there was no Service engine light coming on, so I am assuming he triggered the prompt to come on somehow when installing the HSE.
Does anyone know how to reset the ce prompt so I dont have to take it down to the dealer? I am going to have him ask Indmar tomorrow if his install could have triggered the ce prompt, I can only assume it did because last month it was not on and I have not used the boat at all this winter.
And if anyone is currently using the HSE could you chime in and let me know what wire you tapped in on the ignition to use with the HSE.
Thanks!
I changed my impeller last month and had to bump start the engine and there was no Service engine light coming on, so I am assuming he triggered the prompt to come on somehow when installing the HSE.
Does anyone know how to reset the ce prompt so I dont have to take it down to the dealer? I am going to have him ask Indmar tomorrow if his install could have triggered the ce prompt, I can only assume it did because last month it was not on and I have not used the boat at all this winter.
And if anyone is currently using the HSE could you chime in and let me know what wire you tapped in on the ignition to use with the HSE.
Thanks!