When you upgrade to electronic ignition I got a question about the ballast resistor

[dshaff24]

Okay last night I installed the pcm Prestolite Electronic ignition and it says for me to bypass the ballast resistor,

From what I gather this is the 2 terminal sensor in the back of the motor by the starter solinod on these older supra's,

What I did is just unbolt the one side and bolted them together on the right side! Should this be fine or should I unbolt it all together and just butt connector it?

[saltare inverts]

I dont see why that wouldnt work. Your getting a complete connection. I did the same thing on mine, works well for four years now.

[ltmoeller]

I have the same set up as you on my 89.Has worked perfectly for 3 years.I got my instructions from vince at skidim.
Tom

[wotan2525]

I did the same thing for 2 years... when I rewired the boat I bypassed it completely. Either way should work without a problem.

[dshaff24]

good to hear, Thanks