PDA

View Full Version : Supra Towers


DennisH20toys
10-03-2010, 03:31 PM
does anyone know if there is any easy way or access to tighten bolts on towers
docdrs
10-03-2010, 03:44 PM
what boat do you have?
I have tightened mine but it is easier with 2 people but quite simple
DennisH20toys
10-03-2010, 07:28 PM
I have a 2006 20ssv launch
KG's Supra24
10-03-2010, 10:40 PM
I have an 06 24 and have accessed the nut on mine through by pulling out a cockpit speaker. Not sure if you could do the same, I know we have a different layout.

Which ones are you wanting to tighten?
docdrs
10-04-2010, 08:20 PM
the front ones are easy to access on my boat, the rear i can get at by removing the seat cushions and reaching up behind the side panels and use a deep socket with a straight driver
sandm
10-05-2010, 07:01 PM
I have the 20ssv and had to pull out a speaker on each side. easy one is behind the drivers seat. the tower bolts on the pass side are a biotch to tighten and even get to. def. a 2-person job...

good luck :)