PDA

View Full Version : Wakeplate housing



tgh08
07-22-2002, 11:47 AM
Any help in accessing the housing on the hyd-res for the wakeplate. It is under the rear seat and can be seen through the rear access at the engine compartment. However, it has a perm-holder and does not have enough room to slide out the top. And one last problem, with the ballast, the rear seat can't be moved.

Dan Birchler
07-26-2002, 10:46 AM
The fixture that the unit sits in has two small brackets that act to secure the unit in the fixture. If they're like mine, each bracket is secured with a small screw and when loosened should allow the unit to lift out and pivot toward you to clear the seat and fixture.