PDA

View Full Version : 90 Conbrio: where is the fuse box located?



jimmyk102
05-17-2011, 09:45 PM
Got the boat summerized & checking all the toggle switches on the dash, got to the 2 bilge toggle switches, both LED lights light up yet neither pump is activating or any sound coming from either motor? Dad was getting in there with his volt meter yet he couldn't find the fuse box or are these in-line fuses? What are the chances that both motors are shot?

crystal waters
05-18-2011, 11:31 AM
chances are good! Have replace mine several times

Jetlink
05-18-2011, 01:28 PM
Not entirely familiar but, are your switches just switches or the integrated switch breakers?

jimmyk102
05-18-2011, 07:56 PM
Hmmmm. Crystal waters: on the average what is the shelf life of the motors that you replaced? Jetlink, I will look into that. Any other suggestions - anybody?

Jetlink
05-18-2011, 10:42 PM
If you can snap a picture of your panel when you get an opportunity, I might be able to help by seeing it. I just looked and I don't have any pics of my panel when I redid it on this computer. I do have some on my desktop and I will find one tomorrow for you.

mapleleaf
05-18-2011, 10:57 PM
pretty sure most of the fuses behind my dash are inline, no real fuse block/panel, I'd check for power at the bilge pump. I've also had trouble with some worn out switches.....

jimmyk102
05-19-2011, 08:59 PM
I will check all the above info on Saturday and let you know what I found out along with some photos of the top side of the dash. I want this fixed quickly since I start vacation Fri 4PM, I plan on using this all next week.::D

crystal waters
05-20-2011, 03:53 PM
Hmmmm. Crystal waters: on the average what is the shelf life of the motors that you replaced? Jetlink, I will look into that. Any other suggestions - anybody?

mine is an 89---replaced twice since 94. Last done 6 years ago and still good!