View Full Version : perko question
scottchapin
08-22-2011, 09:27 AM
I have two batteries on a perko switch. Is there anything wrong with switching from battery one to battery two or both while the motor is running? Thanks for all the help on the forum.
Scott
csuggs
08-22-2011, 10:31 AM
No problem - The Perko switch is a "make before break" type switch. You will simply have both batteries connected momentarily before "switching" to the other. The "ALL" position is between position 1 and 2.
http://i887.photobucket.com/albums/ac71/csuggs/DSC03158.jpg
Anybody have a diagram on how to wire 2-batts and a pergo switch. I dont even know how much wire to buy. Thanks Jet
csuggs
08-26-2011, 03:37 PM
Jet -
Ground just requires a jumper from one battery to the other and your existing ground wired to just one battery. Then you'll run a hot cable from each battery to the switch, and another hot cable from the switch to your starter solenoid. So really there's just a minimal amount of additional cable from what you already have for one battery. Ground is common and you're swithching the hot. I used #2 welding cable to make mine custom fit.
Clint
That sounds easy..thanks C
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.