PDA

View Full Version : Have question regarding Electronic Ignition Conversion



bryan_malmquist
09-08-2011, 10:39 AM
I have recently purchased an 87 Supra Comp ts6m and was told it was converted to electronic ignition. I am trying to buy a cap/rotor/coil for a tune up and am wondering if anyone can tell me what the correct parts/part numbers I would need from Skidim? There are a few choices and I want to make sure I get the right ones.

I thank you in advance for your help and support.

Kind Regards,

Bryan

bryan_malmquist
09-08-2011, 10:40 AM
Sorry, it has the PCM 351 engine (not sure if all 87's did or not).

michael hunter
09-08-2011, 07:13 PM
Do you have a Prestolite or Mallory distributor? Is the cap screwed down or does it use clips? Pics would help a lot.

tomelenbaas
09-08-2011, 07:52 PM
It sounds like you're not even sure if your points were replaced by a conversion kit. Pull the cap off the distributor and see what you've got, then call SkiDIM and let them tell you what you need. The Mallory conversion kit I used a few years ago retained the stock cap.