Oil extraction pump. Which one do you guys like

[ditchsnake]

My old jabsco pump for sucking oil out of the dip stick went out. I was looking online and thought that some of you might have one you'ld recomend. Thanks Geno

[Lauderdale Lakes Chicago]

http://www.iboats.com/JABSCO-DIY-OIL-CHANGE-SYSTEMW-PUMP-AND-3-5-GALLON-BUCKET-ITT-Jabsco/dm/cart_id.250229893--session_id.730829502--view_id.472242

We use these in the shop......

[beast 496]

We change oil in several hundred boats a year. We use an Electric Deisel fuel transfer pump, rotary vein. Usually around $100.00 From Northern Equipment. Couple this to a 1/2 vacum hose and compatable fitting, sitting on top of a 3 gallon or 5 gallon bucket. Hot oil completely sucked out in less than 1 minute. Cold oil, a little longer but still no problems. The Jabsco pumps are way too slow for me. Al

[viking]

i use the Pela 6000. Works great. I use the drain pan hose not the dipstick though.

[wotan2525]

I built one using a simmer pump ($60), a 5-gallon bucket ($4) and some misc fittings. Takes about 5 minutes with warm oil. And cheap!

[jet]

I like the one where you warm up the eng and let it drian for 1-hr. lol I know, Im a smart a**.

[ditchsnake]

i use the Pela 6000. Works great. I use the drain pan hose not the dipstick though. My mistake. I use the drain pan hose too. Seems like all the reviews I read, half the guys like a product and the other half thinks it sucks???????????? A buddy recomended the shurflo pump but I don't know if it is just another cheap pump setup.

[McDye]

This what I have also...got mine cheaper, but get all 3 fliuds pulled in 15 min...

http://www.iboats.com/JABSCO-DIY-OIL...view_id.472242