Printable View
I just upgraded my sacs to the GGIII and I think I might get the acme 1235 prop as my last Modification for beofre the summer. Does anyone know of any clearance issues or things to watch for when loading and unloading the boat? I have 2003 22ssv. thanks for the help guys
Sorry to bring this thread up from the grave. Did you end up going with the Acme 1235? Was there a clearance issue? I thought a lot of guys were using the OJ 466 or 468 with the 14" diameter to avoid the chance of hitting the trailer.Quote:
Originally Posted by castin
I went with the OJ Fusion prop on my 05 Launch 21V and have been very happy with it. It is very similar to the Acme 1235 and I can easily get on plane with 2500 - 3000 lbs (ballast + passengers). There are no clearance issues but I do recommend doing a shallow launch when pulling the boat out of the water just to be sure you don't bang into the trailer.
I bought the ACME 1235 last year for my 2005 21V. There were clearance issues with the trailer, but I knew about that before I ordered it. I contacted boatmate and they sent me a set of shims to fix the issue at no charge. The prop is so much better than the stock one.
I changed to a 14X14 which is just under the size your looking at with no trailer or boat clearences to worry about, but man it was a 100% difference across the board. It pushes HARD now with just the lightest throttle touch and gas milage is great now to, no more spinning the motor and not going anywhere. THUMBS UP!!!!!!
Just put my Fusion 532 on with about 7 hours on it. Ran the 1235 on my Supra and the 532 seems identicle to performance, which is awesome. I have not had any clearance issues with the 532.... and as others have mentioned, pulls hard and gets the boat on plane quickly.Quote:
Originally Posted by pjohnson8
Thumbs up for me for the OJ Fusion 532. :D