Looks great Mikey, enjoy the ol' Sun Sport. I'm missing mine bad now that I'm back at school. (Don't really have a place for it here right now, maybe next semester or year though). Enjoy the fall!
Printable View
Looks great Mikey, enjoy the ol' Sun Sport. I'm missing mine bad now that I'm back at school. (Don't really have a place for it here right now, maybe next semester or year though). Enjoy the fall!
Your back!!! Congrats, looks nice...still plenty of time for riding and surfing this year!
Mikey, first off I love your boat. Secondly I'm picking up a '85 Marauder tomorrow and first thing it needs is a prop. I looked for it but couldn't see what you upgraded to when you bought your new one? Any advice?
Oh snap zombie thread is back from the dead! I swear this summer I am gonna kill it like never before! Wake and surf and pics of it all for proof. I am thinking of putting a mini keg of homebrew on the boat??? For the WIN!!!
btpack- Thanks man! It's a labor of love for sure. I have wanted one of these boats for about 15 years ever since I saw them locally. Congrats on your Marauder! That boat should be a 1:1 trans and a stock 13x13 prop.
What you want depends on what you do behind the boat. I ONLY wakeboard and wakesurf WITH OVER 1000lbs weight. Those two things tell me to get a hardcore power prop. I went with the new ACME913 (edit: corrected) 10.5x13 from nettleprops.com. Tell them I sent you they will hook you up :) they are great guys and nice to chat with too. IMHO, make sure you tell the seller (or put in the bill of sale) that the sale is dependent on a motor compression test.
Assuming you also checked the floors and stringers as much as possible? Check around the drivers seat and in front of the rear bench seat. Check under the rear bench seat too, examine the wood the bench seat is made of for black wood. GOOD LUCK!
You have a 1-1/8" shaft? Or did you mean 913?
Sorry yes I meant 913 :) post edited
S'all good...it does however make me happy as I got a 913 as an extra with my first boat...looks like she's going on the saltare!
Mini keg of home brew? Awesome! Watch out for foaminess on the rough days though, Ha.
Do you still have your old motor around? I need a crank pulley that isn't bent.
What up Sean! Ya I was worried about foam, thinking of floating it in water inside my built in cooler to absorb the shocks. :) 2.5g keg or maybe 1g.
I do not have my motor, but my mechanic might still have it, or have access to what you need. Hit him up, he rawks. Doug Miller 651-238-4698
I didnt think Supra made a hydraulic wake plate until much later.
At the risk of bringing up an oldddd thread, I wanted to first say thank you for wasting my entire morning at work...I have deadlines man! Secondly, you are making me more and more sure that I want to buy this: http://sacramento.craigslist.org/boa/2638839257.html
I would be cautious. With no mention of the stringers or floors condition, I would be really cautious. The boat looks good, but the price is high.Quote:
Originally Posted by cavilry
Very nice!!
Ckruse12 and cavilry thanks. This thread will never die as long as I own this boat. :)
She is dewinterized and ready to rock. hoping to do a couple minor upgrades this year, nothing special. We mostly surf still. Love the new engine and the new prop. Still trying to get beer on tap in my boat :)
sallyliao it's an aftermarket Bennett hydrolic trim tab installed by the original owner.
Mikey!!!!!!! My friends brew and i know how much time it takes......Stick around homie....
How long do you have to wait til the water up there in Minnesota doesn't freeze you to death? :) I looked and tried to find on your thread what happened that required the new engine but can't find anything. Did the block crack or something?
Hey Maple! I brew a LOT. http://mikerobrew.blogspot.com/ Yeah I'm back thanks for the support :)
D I dropped her in on Saturday, air was 72. No water temp, sorry. It was fine at the landing, but SHOCKINGLY cold in the middle of the lake. We didn't try to board. :) A couple years ago she started making a blowback noise (kinda like a backfire) and she would lose power sometimes. I took her into my mechanic (never use a dealer!) and he did a compression test and 6 of 8 cylinders had low compression. Rather than rebuild my engine I found a factory rebuilt 351 on craigslist and brought that to my mechanic who dropped it in and tuned it and etc.
Haha yeah we boarded for the first time this year almost a month ago (only been once since) and I got a wetsuit this winter so it wasn't too bad for me. My friend boarded without a suit...he's nuts! Almost went completely numb lol. Can't wait til it feels good to jump in the cool water :) The water at our lake is already gettting tolerable...up to about 63 I think.
Ah nice...well hopefully that rebuilt one will last forever!
I just wanted to add to this crazy thread... my eyes hurt from all the reading.:)
Love the thread keep 'r' going.
Dandaman and waitowski thanks for reading. I know it is a long thread!
Well I ran into some problems this spring and had to keep her our of the water for a couple weeks. Boat is overheating, water pump is suspect after changing three impellers. Changed and should get tested this weekend.
I also had some water coming into the boat. This was a real mystery. It turned out to be a leak where the exhaust pipe exits the transom of the boat. Now it has been sealed with silicone. My boat has solid exhaust pipes, but I guess some boats have rubber 'mufflers' inline. To find this leak we had to cut a small hole in the floor under the rear bench seat. This was really stressful to do, but it revealed that my stringers appear to be in near-perfect shape. I know that is hard to believe, so I will knock on wood for good luck. I am gonna have to rebuild my rear bench seat sometime soon too. Hopefully a little bigger for a little more ballast.
Hoping to take her our this weekend and for fourth of July. Hope everyone is well.
Had some issues with throttle cable connection last weekend. Fixed and riding again, yay! Time for a couple new pics, I suppose.
https://sphotos-b.xx.fbcdn.net/hphot...17264430_o.jpg
https://sphotos-b.xx.fbcdn.net/hphot...68844457_o.jpg
https://sphotos-a.xx.fbcdn.net/hphot...63183607_o.jpg
https://sphotos-a.xx.fbcdn.net/hphot...15848887_o.jpg
Party time
https://sphotos-b.xx.fbcdn.net/hphot...66430118_n.jpg
Old pic on my LF Trip, riding on Lake Superior with iron ore tanker in background
https://sphotos-b.xx.fbcdn.net/hphot...050_8859_n.jpg
Still one of my favorites
https://sphotos-b.xx.fbcdn.net/hphot...72905058_n.jpg
just read through it all, awesome work. have you done any updates to it recently? sorry for the thread revival!
I have never wake surfed. I surf in the ocean but you inspired me to find an old sunsport and make it happen. I have a guy replacing my stringers and floors and while he is in there I want to add ballast. Do you have that stuff plumbed with switches? what are the dimensions or model #s of the fly-high sacs you are using?? did you have to modify the back seat at all or just cut out the ski locker? I have been looking at what everyone else is doing and yours seems the most straight forward. Any help would be totally appreciated. I love your thread, its obvious that is your baby.
Take care
Kathy
I am thinking about doing Exactly what you have done. Thanks for the confirmation that I can turn an 86 Supra into a Surf boat.