Printable View
Attachment 19418I hope you boys can help me find the rubber matting that goes in the bow. The comp is going in this winter for a polishing. The windshield is coming of new strips the works and I'd like to replace the rubber on the bow. Attachment 19416Attachment 19417
Take a look at Amazon. Some of my friends bought there. I can ask if you need.
yes I'm not sure what it's called.
Hey Hagman, I'm working on this currently for my 91 Comp restoration. I believe I have found similar material but not 100% positive. I was going to order some and found out they want you to buy a very large role and so I declined. Then I thought at least I should buy, verify if same, then return if need be. If it is the same, I will have plenty of extra. I am very particular about my stuff so prefer to have it professionally cut into the patterns I saved when I took them off the bow and dash.Quote:
Originally Posted by Hagman
I am going to upgrade to SeaDek or gatorstep for my swim platform as I just had it professionally rebuilt but not stray too far from the originality using same color black.
Attachment 19435I've looked eBay, Amazon exct. Not sure what to call it. 17 years ago I had to buy a 3x5'
What's the pic from? So, you haven't found new product yet?Quote:
Originally Posted by Hagman
It's a closeup of the rubber mat. that's on the bow.
10-4, that's what I was thinking. Stuff I mentioned above isn't same so search continues. Have a local source I'm gonna try out.
Mine is off the boat so I can take it with me for comparison.
Hagman, what do you think about this?
https://www.amazon.com/stores/GatorG...7-F0D3085375C6
https://www.gator-guards.com/product...14139083980855
https://www.youtube.com/watch?v=SsQJlRnBSSM
https://www.youtube.com/watch?v=SLccW1laslY
Choose between grit or pebble.
Good try. Thanks for looking . I'd like to find the exact material. I'm going to move forward with polishing after the holidays. I'll just mask off the rubber. I have enough factory striping left from last time. Keep your eyes open for more of the 2 1/4" striping. My shop can make the letters but the striping comes 8' in pieces. and a Airglide pedo tube there really hard to find.
Quote:
Originally Posted by Mischief IV
I actually went with a derivative of SeaDek to replace mine so it matches what I'm doing on the swim platform. It's a soft material so it will not be hard and/ or plastic looking. Will see if I like, they are making mine from the original patterns as I was able to get bow and dash pads off easily. It's a modern update to an old look.Quote:
Originally Posted by Hagman
As far as striping goes, I ordered 150 feet of yellow, orange, red combined into one stripe and have leftover. I also have a set of correct size waves along with plenty of blue stripe. I also have the Supra Comp ts6m in white ready to go. I even have a set of the Kevlar SupraTrac decals and rear transom Official World Championship Tow Boat decals. Everything you see on my Comp in this thread...https://forum.supraboats.com/showthr...pra-Comp/page6. is available and ready for ship.
I may have some old original pitots you can have. Would need to check my inventory.
I looked at comp pictures. You have did a assume job on that comp but I'm partial to your Rider. Hope you still have it and if not, it went to loving home. I have the letters and the wave made already. I'm interested in the striping if the finish width including the blue is about 2 1/4". I had toyed with the idea of changing the blue strip and the wave to blue reflective color of the same blue Attachment 19498tone. Would you part with about34'.
Quote:
Originally Posted by Mischief IV
Thanks for the comments. The beloved Rider is still in my possession undergoing a rotisserie restoration as I type and I will have a new thread on her since the last one was taken down years ago. I got screwed royally by Bennett's Boat Repair on the last set of stringers and so she took a back seat to other projects for the last 6 years. I have since decided to restore her once again using composite stringers even after a major fail on the top cap. She will be brought back from the dead if it's the last thing I do on this earth.
As far as Comp goes, I did my best to duplicate the original striping. I took dimensions on everything before I began the restoration. The major difference is the color blue that I used not the sizing. With my Rider, I changed the light blue to the Olympic blue as it pops much better against the red, so I ultimately went with Olympic blue on the Comp as well to match both boats. It's personal preference on a lot of this stuff and don't blame you if you keep the light blue. Avery is manufacturer on the blue I used.
Posting some pics below and description to help you better understand if this fits your needs.
Currently, the multi-stripe is in the hands of forum member NoWake in TN as he decided to make his twin Comp to mine look new again after seeing my pics. I should have plenty for you once he ships it back to me. I'd be more than welcome to ship you whatever you need.
Multi-stripe is as follows:
1007 yellow 1/4” width
No spacing
1010 tangerine 1/2” width
No spacing
76 red 1” width
Single stripe blue is as follows:
1016 Olympic blue 3/8 inch roll.
https://i.imgur.com/9B7Wvdm.jpg
https://i.imgur.com/Yzs8kgo.jpg
https://i.imgur.com/KdPlZ9J.jpg
https://i.imgur.com/ChdUZoS.jpg
Here are a few pics of the Rider as an update. New thread coming soon on history and current issues along with restoration.
Same as signature pic showing boats I currently own.
https://i.imgur.com/xBSEdWE.jpg
Last time Mischief IV was out on the water. November 16th, 2014
https://i.imgur.com/ncjpRaU.jpg
Torn apart for the third time on December 1st, 2019 after sitting in the garage for 5 years
https://i.imgur.com/FV0L4PN.jpg
Entered the shop on October 16th, 2020 for new composite stringers.
https://i.imgur.com/ouWGvgL.jpg
Matching years and matching trailers on the two '83 Supras? How did you manage that?
Luck, I guess. :cool:Quote:
Originally Posted by Jetlink