Printable View
about a year and a half ago i bought a 87 sunsport in rough condition. The stringers needed to be replaced and the guy i bought it from did all the demo work for me before i bought it. Now that I have a little free time i'm going to hit this project pretty hard. I'm planning on converting the tank to a v-drive and replacing the stringer of course. This will be my first boat rebuild. any tips?? i'll post pictures as the project progresses. Attachment 18052
Only tip I can give you is to sell the boat and go and buy a Vdrive boat . For all the time and expense you will have in the 87 you will have more than enough money to buy a ready to go Vdrive.
I'll second that! Sure isn't worth the work and the added maintenance/ issues you'll have to workout along the way. If you're looking for a project look for a V-drive with issues for a good price.Quote:
Originally Posted by michael hunter
Sent from my iPhone using Tapatalk
It's your time and money, if you have enough of them both...then go for it. Figuring out the geometry/angles for the mounts to have everything line up with the prop shaft would be pretty challenging.
I don't think so. Start from the bottom. Mount the strut, insert the shaft and coupler, align the v-drive to that and fabricate stringers/mounts around that position. Then align the engine to the transmission in the same way. I don't think it would be that tough, but I do agree that after the expense (and difficulty) of sourcing the parts and putting the work in..... you would be better off buying a v-drive.Quote:
Originally Posted by Cooose