Perfect pass stargazer install

I am sure this has been covered many times on here but be dambed if I can find them so here we go.
3.5" multiline display going in
http://i916.photobucket.com/albums/a...3-05194341.jpg
So far out of this hole thing getting the wireing from the servo up to the dash has by far been the hardest part.
The servo on the eng
http://i916.photobucket.com/albums/a...3-01155527.jpg
This was so easy it makes you feal like you missed somthing.
Turns out the only pic of the cable conection is blurry.
Oh well will get a good one tomorro.

Wiring this thing up is so easy.

Everything ties in at the tach.
The only thing that could be a little better is there are two ground wires. Im not sure why they would do that when it could be done internal to clean things up a bit more.

Other than that it is pretty straight forward.

The pp cable connects to the carb then your factory cable connects to that.
Realy simple setup that doesnt let the servo throttle past the operator in put through the lever.
http://i916.photobucket.com/albums/a...3-01155533.jpg

Cool to see the write up, and a system installed on an older boat.

Did you buy the system new from PP or did you piece it together yourself from ebay or something?

Found a deal on the servo and wireing on ebay. The multi line display came from ski it again.
Stargazer master module and gps antenna from pp.

I havnt finished it yet because my lovely 90# puppy thought the gps antenna was a chew tow.
This dog has cost me over a grand now it stuff he has eaten. Anybody want a 1/2 lab 1/2 wiemeroner (not at all spelled right)

Ha guy as I got a great deal on my perfect pass. I was at my boat shop here in Oregon one afternoon. I asked the guys about perfect pass. The owner of the shop said hey I got a great deal for Ya. I sold this stargazer unit to a customer last year. He said there was something wrong with it, he thought the brain was scrambled and didn’t want a mess with it anymore. He could let me have it for half price. After installing it I found that, what was on the screen didn’t match up with the owner’s manual. I messed around with it most of a day. The next morning I got online and found the phone number to perfect pass. The technician I talked to was very informative. After speaking with me for about 3 or 4 minutes he asked me to go out get my boat turn the key on and tell him exactly what the screen said. I could hear the technician smiling on the other end of the phone. He informed me that
somehow the wrong manual had been shipped with the unit. He gave me the website to perfect pass and I downloaded the correct manual. It
works awesome.. PS it has a great digital tack in it.
Attachment 8935

The folks at pp have been great

Even when I call to order another gps antenna at $265

Sure nobody wants a good mutt only a $1000 just looking to brake even.

Does any one have a close up pic of there stargazer antenna plug.

mine is mangled

The master module mounted high up under the dash with the suppled stainless screws.
At this point it is all just plug in
http://i916.photobucket.com/albums/a...3-10135409.jpg