Wiring help 03 Supra

Hello all. Last year raccoon. Got into my boat and decided to start chewing on my wires. I was able to figure out all the placements but one. And then I figured out what it was for. It's for the automatic bildge. I took a few pictures and if anyone has the same set up any help would be great and a picture of where it goes. It has a fuse holder and is a brown wire. https://uploads.tapatalk-cdn.com/201...b3e0986eec.jpghttps://uploads.tapatalk-cdn.com/201...15884527b9.jpghttps://uploads.tapatalk-cdn.com/201...c7aeeae9e9.jpg


Sent from my iPhone using Tapatalk

Although I've never chased the wires to the dash, the system has two brown wires. One for the switched function on the side panel and the other for the float switch. I would just find a always hot spade connector on the circuit panel pictures and give the wire power then verify its function.

Quote:

---

Originally Posted by CornRickey

Although I've never chased the wires to the dash, the system has two brown wires. One for the switched function on the side panel and the other for the float switch. I would just find a always hot spade connector on the circuit panel pictures and give the wire power then verify its function.

---

Thanks for your reply. Trying to figure out where this wire goes is a pain.


Sent from my iPhone using Tapatalk