I just got a GG 24SSV 1180 full up front, 1100s both full in rear, shaper is a must. Best wave seems to be 5-6 person crew and running at 11.2- 11.6
Type: Posts; User: middlegriff1
I just got a GG 24SSV 1180 full up front, 1100s both full in rear, shaper is a must. Best wave seems to be 5-6 person crew and running at 11.2- 11.6
How much for both sides?
Are they factory tinted or clear?
Either neutral safety switch or in the past I had a bad connection on the purple wire going into the distributor. Had to wiggle it sometimes to get the boat to start. Same symptoms, either start just...
Thanks Knox!
Just picking everyone's brain. A few friends an I want to plan a trip to a lake that's possibly 6-8hr drive from Maryland. We're looking for something close so we can tow our rigs unless its possible...
Starting from the Key: Power, Auto Bilge, Manual Bilge. Then you have indicator lights top left Oil, top Right Fuel, Bottom Left Temp, I forget what the bottom right is. On the right side of the dash...
I haven't been on the site much, sorry on the late response. We usually launch out of Port Tobacco Marina, hangout in some of the coves or around Fairview Beach. Also plan a couple trips to Lake Anna...
I haven't done it but I can imagine it's: pulling the rubrail and drilling out all the rivets holding the upper and lower together, disconnecting any wired connections, steering cable, and throttle...
ive seen estimates from 3500-5k for stringers and floor
ACME 541, its awesome. Or if you're running a lot of weight ive heard the 543 is good
They both look a little flat, might have to make a hub spacer
Got some time to rebuild the lower dash panel and install the new wheel and remote. Now I really need to rebuild the upper dash with some new rockers and gauges....
18280
18281
18282
18283
You can get material by the yard at greatlakesskipper.com They'll also send you samples so you can get the color just right and they sell welting by the foot premade
Toymanator- Here's some more pics of the anchor door and gatorstep
18265
18266
18267
18268
The seat is working out great so far. Seems to get used just as much as any other seat. Permanent wouldn't be a bad idea. If mine were permanent I would make it so I could store things under and...
I love the new prop, better everything on mine aswell!
Thanks Sdc. I haven't gotten to the dash yet because Im trying to decide whether I want to do it during the season or after the boat is...
Some pics from Lake Anna this year
18262
18263
18264
So its been awhile...
At the end of last season I ended up cracking two pistons and sent the chunks into the heads and out the valves. Over the winter I had the motor rebuilt. Its now bored .060...
looks awesome!
There is one on each side of the motor midway back right above the oil pan.
Awesome idea! I was thinking you could make a frame that has something along the lines of a simple pool lounge chair? Lift up and sit the bar in the hooks? I might have to look into this one
Ill try and get you a pic today.
Little off topic, but im in between those two props (541 & 543) what are upsides and downsides to both if you don't mind.
I don't have a close up pic but this is the cover. It doesn't fit exact.
...