Thanks for the tips guys! Excited to get this over with...
Type: Posts; User: nd4spd
Thanks for the tips guys! Excited to get this over with...
I don't know what caused it. The crack was there when I bought it. I can only assume that it froze.
Hey Guys,
My slight water jacket leak turned into a gusher this summer. I've got it patched with some epoxy for now, but don't like running like this. I'm planning to replace both manifolds this...
I live in the Ottawa valley. I have family all over the province and visit them frequently. I was hoping somebody would recommend a place where they purchase their gear.
Hey Guys,
I just put together an order for some Supra tee-shirts and other merchandise on the Supra website. The shipping turned out to be more than the order :(. Does anybody know where to pick...
14999
15001
15000
Out for a morning cruise with the old flea bag, while the boss is at work. :p
I purchased a Humminbird HDR650 in 2013. Installation was simple, and I'm satisfied with its performance. I mounted the transducer in the hull next to the drive shaft packing box. Depth readings are...
I opened up my thermostat housing a few weeks ago and this is what I Found.
14965
My temperature control is rock steady after removing that old piece of rubber & replacing the thermostat. For...
14743
Making some dollar signs on the Ottawa River!
My first time barefooting.
1467414675
1: Thanks for the info!
2: I don't think that it's necessarily cooling more. Just that it's a different ratio of heat removal vs. heat production at idle than 2 500 rpm.
Hey Guys,
A few questions:
1) Is it possible to change the low voltage alarm setting on a '92 Comp? Mine alarms when I have the stereo turned up with the engine running, it will also alarm for...
I built this cover when I bought my Comp. It's worked quite well over the past 2 winters. I try to tie up the tarp a little loosely so I get some airflow through it.
Storing the frame each spring...
Not to mention that the melted plastic will likely foul the plug.
Forever more I will be taping the straws onto the can.
I did pretty much the same thing.....rotated the crank by hand and used a small hook to pull the straw out.
Today I was spraying lay-up lubricant into my cylinders. In a bit (a lot) of bad luck, while doing the cylinder which as near bottom-dead-center, the straw popped off the can. Before I could lift my...
My Comp's got them. Perhaps you've already got them, and they're just plugged; check the corners.
700 meters from driveway to boat launch. About a 2 minute drive.
13075
13074
13072
13073
13076
Looks awesome la torta!
I'd love to replace the fiberglass platform on my '92 comp with a wooden one. What kind of wood did you make it with? Could you please post a picture of the underside?
...
Hey Guys,
I've been running my '92 comp with the wake plate at the previous owner's setting - I doubt it's ever been moved from the factory setting. There's a bit of a rooster tail which I hate...
I tried a gear puller on mine (you can even see the dimple in the top of the rudder post - 2nd last picture in my thread that you re-posted). The tiller arm is such an awkward shape that it was next...
Yup. Found on at Canadian Tire. Thanks.
Hello hello,
Does anybody know where to get a replacement bulb for the transom light on a '92 Comp? Is it a common bulb that I can get at my auto parts store?
Thanks!
Got the rudder out a couple of days ago.
The trick is A LOT of penetrating oil and even more patience (let it sit for three nights) haha. I attempted the double nut, but was unable to rotate the...