Search:

Type: Posts; User: JSPulliam21

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    12
    Views
    308

    What is voltage measured at the battery, and at...

    What is voltage measured at the battery, and at the starter? Also, what are those voltages when attempting to crank the boat over?

    Sent from my SM-N950U using Tapatalk
  2. Can't argue with your plan. [emoji1360] Sent...

    Can't argue with your plan. [emoji1360]

    Sent from my SM-N950U using Tapatalk
  3. Excellent. Where does power to them come from?...

    Excellent. Where does power to them come from? ECM or key switch? Can you see what color the trigger wires are and where they go?

    Sent from my SM-N950U using Tapatalk
  4. No joke! Sent from my SM-N950U using Tapatalk

    No joke!

    Sent from my SM-N950U using Tapatalk
  5. Do you have power on both sides of the fuel pump...

    Do you have power on both sides of the fuel pump fuse with it installed in the fuse block? If the fuse is not the type you can probe, you can pull the fuse and check to see if you have 12V on one...
  6. Do you have 12v at the fuel pump with the key on?...

    Do you have 12v at the fuel pump with the key on?

    Sent from my SM-N950U using Tapatalk
  7. Pretty sure that's what he's talking about. You...

    Pretty sure that's what he's talking about. You may want to check those fuses with a meter. I've had them blow where you couldn't see it in the transparent window, but the meter showed it open.
    ...
  8. How did you check the fuses? Sent from my...

    How did you check the fuses?

    Sent from my SM-N950U using Tapatalk
  9. It looks like the nut should be 3/4"-10 for 1" -...

    It looks like the nut should be 3/4"-10 for 1" - 1.125" shaft or 7/8"-9 for a 1.25" shaft. Do you know the shaft diameter?

    Sent from my SM-N950U using Tapatalk
  10. Replies
    5
    Views
    3,204

    I am interested too. My 92 Mariah platform never...

    I am interested too. My 92 Mariah platform never has suited me and I'd love to replace it with teak or a larger one. Did yours tear out of the hull, or off the brackets!?

    Sent from my SM-N950U...
  11. Replies
    10
    Views
    8,536

    If it wasn't new then take it out and put it in a...

    If it wasn't new then take it out and put it in a pot of water on the stove. Measure the temperature of the water when you see the thermostat start opening to verify it's working correctly. Verify...
  12. Replies
    10
    Views
    8,536

    New/functioning thermostat? Do you know the...

    New/functioning thermostat? Do you know the sender and gauge are good?is this sitting in the water or on the hose?

    Sent from my SM-N950U using Tapatalk
  13. Could be. Pull the coil wire off the cap and hold...

    Could be. Pull the coil wire off the cap and hold it close to a ground to see if you are getting fire out of the coil. If so, then the cap, condenser, or points are next.

    Sent from my SM-N950U...
  14. Do you mean the ignition coil? Does it look like...

    Do you mean the ignition coil? Does it look like this?https://uploads.tapatalk-cdn.com/20191028/cd575cb6f46f6bf99db00b50b44a8250.jpg

    Sent from my SM-N950U using Tapatalk
  15. Thread: muffler

    by JSPulliam21
    Replies
    1
    Views
    222

    I have a set on my 92 Mariah and it still sounds...

    I have a set on my 92 Mariah and it still sounds good, but it is not overly loud. Maybe like the difference between a performance muffler and straight pipes on a truck. Waaaaay quieter comparatively,...
  16. Some say it is overkill to replace it every year,...

    Some say it is overkill to replace it every year, so I thought I would just inspect and reinstall too. It certainly doesn't protect you from what you can't see between the hub and the rubber. So, I'm...
  17. No issues today with the raw water pump,...

    No issues today with the raw water pump, plumbing, thermostat, or oil. Boat ran good and stayed cool. I believe I will add a water pressure gauge, since I would have known as soon as we got in the...
  18. This evening after another oil change I was...

    This evening after another oil change I was running it on the hose to get this batch hot and verify I was still ok. I noticed a hot smell, and my wife said there wasn't any water coming out of the...
  19. New thermostat is in and opens at about 140 to...

    New thermostat is in and opens at about 140 to 150 and temp stays steady on the hose. The oil that was in it got changed and the fresh oil is getting drained tonight for another fill to hopefully get...
  20. Replies
    1
    Views
    539

    My 92 Mariah with a 351 uses the following:...

    My 92 Mariah with a 351 uses the following:
    Gates XL 7400
    Gates XL 7455

    Local auto parts store was really high on them so ordered cheaper through SKIDIM. Amazon was also cheaper than the local...
  21. Thank you guys for the advice. I will run it...

    Thank you guys for the advice. I will run it tonight on the hose and see if we can get all the water out of the crankcase. Goal is to head to the lake afterwards this week to see if the raw water...
  22. Compression test results engine cold and plugs...

    Compression test results engine cold and plugs out.

    1) 135
    2) 145
    3) 145
    4) 145
    5) 135
    6) 140
    7) 130
    8) 140
  23. Michael I'm fairly sure a stuck thermostat and...

    Michael I'm fairly sure a stuck thermostat and possibly an air leak in the raw water line caused the overheat. We didn't overheat on our way out for the day, but on our way back. All we did was ride...
  24. I guess a compression check is in order rather...

    I guess a compression check is in order rather than a river test.

    Sent from my SM-N950U using Tapatalk
  25. Well that sucks. Sent from my SM-N950U using...

    Well that sucks.

    Sent from my SM-N950U using Tapatalk
Results 1 to 25 of 45
Page 1 of 2 1 2