Thanks for the response! I've had it since fall 2011 or spring 2012...can't remember when I got it. It is a smaller boat for sure compared to the other boats on the lake but we don't need a huge...
Type: Posts; User: jwwalk
Thanks for the response! I've had it since fall 2011 or spring 2012...can't remember when I got it. It is a smaller boat for sure compared to the other boats on the lake but we don't need a huge...
Going through the dash on my 1989 Conbrio (351W) for a number of reasons and am trying to chase a temperature gauge thats pegged high. I changed the sender last year so don't think its that, I'll...
Hi guys, thanks for the information. I will try to get a picture. I found a couple pictures online which showed the bracket going to the front of the engine block, just to the port side of the...
Hi guys! I am in the process of replacing all the 1" water lines on my boat (1989 Conbrio with the 351W). I pulled the line that runs under the engine from the trans cooler to the impeller pump and...
Thanks, I will try this out.
Hello all, I am in the process of cleaning and checking out my 1989 Conbrio (351W) after it has sat for roughly 2.5 years while I built my house. I found what appears to be coolant in the bilge but...
What are you thinking of for price?
My 89 Conbrio (351W) uses the 1" Flush Pro. You could contact the guys at SkiDim (803-345-0996), they were very helpful when I needed to order a replacement for mine at the beginning of this season.
Had some time to drop my friend's boat in the water at my house on Sunday. He's got an '89 Comp and I have an '89 Conbrio. The boats are essentially the exact same (color, engine, trans) except for...
codemonkey82, can you tell me how the rear blower look (maybe you still have the cap off)? I need to purchase new vents for my boat and there are a few styles. One is completely flat with no flange...
I went out to the boat and it seems the alternator belt has lost tension. I ordered a new set of belts from skidim.com yesterday and they should be here tomorrow! Hoping to install those along with...
Thanks guys. I will check the accessory drive system this evening when I get home.
Hi guys, Last year I noticed a squeal after starting my boat (when the engine was cold) which went away after increasing engine speed for about 5 to 6 seconds while in neutral. I am thinking its the...
Who ended up doing your boat? What all did they do? Stringers only or floor too?
I live in White Lake and am pondering getting mine redone.
Hmm, I will take a look at my boat when I get home tonight. I haven't been in it much this year other than to uncover it. If you have a picture, that might help.
Ideal? Probably not. It doesn't throw the largest wake however when we get 3 good sized guys on the back seat and one in the observers seat it puts out a decent wake for wakeboarding. I also have a...
I just purchased a TaylorMade Trailorite cover from West Marine. TaylorMade has a variety of options but can custom make on for a certain model of boat. Price at West Marine was $350 for Ultima...
Just curious what everybody uses for batteries (brand, size, AGM?)? I am looking to replace my battery on my 1989 Supra Conbrio (currntly have a 500CCA, 625MCA).
What if you have a turn-down or side exit after the rear axle...less time for the smoke to roll and land on the boat.
What program are you using to tune the truck?
After throwing the boat in last night, it looks like the shaft is leaking more than it should. I'm thinking of replacing the shaft packing on my 1989 Conbrio but it seems the packing nut is just...
My 1989 Conbrio with black/white SUPRA on side.
13779
I purchased a cantilevered lift about 3 years ago. Shortly after, my friend's dad gave me his 5 year old veritical lift with canopy. In my mind they will all work for an inboard, like others have...
70 degrees and sunny = one last wakeboard session...unless tomorrow is nice too.
13354
A few pics from the weekend. None from wakeboarding but a few random pics. The weather actually has been holding up well. This week we are getting a 2 day 90 degree heat wave. Should be nice.
...
I have used Lakeside Marine in Commerce/West Bloomfield for winterization, shrinkwrapping and hoist removal/installation. They seem very reasonably priced. A few friends also have used the company...